MODELING OF THE 2ND ORDER CURVES AND SURFACES OF ENGINEERING STRUCTURES SHELLS BASED ON THEIR BASIS
Article Sidebar
Main Article Content
Abstract
The paper describes an example of modeling an arc of a 2nd order curve using an engineering discriminant and its analytical description based on a graphical algorithm for constructing a curve in point calculus. Examples of modeling the surfaces of engineering structures shells on an elliptical and rectangular plan are given. Research methods include geometric algorithms: modeling of 2nd order curves passing through 3 predetermined points in advance and having tangents at the start and end points, and shell surfaces based on them; analytical definition of curves arcs and sections of surfaces using the mathematical apparatus point calculation in a given parametrization and taking into account all predetermined geometric conditions. This approach can be widely used in the practice of modeling the shells of engineering structures for various technical purposes. It allows the designer to choose the best curvature of the shell surface, which will have the necessary strength characteristics, technical aesthetics and artistic expressiveness. The possibility of dividing the surface of the shell into finite elements of a given amount is also provided for studying the stress-strain state of the shell under the action of various loads in the systems of finite element analysis.
Article Details
References
Vertinskaya N.D. On some features of the behavior of second-order curves on the projective plane // Modern high-tech technologies, 2014. No. 10. 124-127 pp. (In Russian)
Sal´kov N.A. Dupin cyclide and second-order curves. Part 1 // Geometry and graphics, 2016. Vol. 4. No. 2. 19-28 pp. (In Russian)
Voloshinov D.V. A unified constructive algorithm for second-order curves’ foci creation // Geometry and graphics, 2018. Vol. 6. No. 2. 47-54 pp. (In Russian)
Korotkiy V.A. Computer visualization of conic curve passing through the imaginary point and the imaginary concerning direct // Scientific Visualization, 2018. Vol. 10. No. 1. 56-68 pp. DOI 10.26583/sv.10.1.04. (In Russian)
Korotky V.A., Usmanova E.A. The use of second-order curves to construct smooth frame-mesh surfaces // Bulletin of the South Ural State University. Series: Construction and Architecture, 2014. Vol. 14. No. 3. 45-48 pp. (In Russian)
Panchuk K.L. Second-order curves of an elliptic plane: monograph // Omsk: Publishing house of OmSTU, 2015. 92 p. (In Russian)
Myasoedova T.M. Construction of contours of the 2nd order of smoothness from arcs of the 2nd order curves // Young Russia: advanced technologies in industry, 2019. No. 1. 212-215 pp. DOI 10.25206/2310-4597-2019-1-212-215. (In Russian)
Abramov E.V., Shevtsova T.S. Simplifying the general equation of a second-order curve using a quadratic form // Bulletin VIEPL, 2019. No2. 6-10 pp. (In Russian)
Demeneva N.V. Analytical geometry. Second-order curves // Federal State Budgetary Educational Institution of Higher Education "Perm State Agrarian and Technological University named after Academician D.N. Pryanishnikov". Perm: CPI Prokrost, 2019. 310 p. ISBN 9785942794613. (In Russian)
Golovanov N.N. Geometric modeling // Moscow: INFRA-M, 2019. 400 p. (In Russian)
Boykov A.A. Development and application of the geometry constructions language to building computer geometric models // IoP conference series: Journal of Physics: Conf. Series 1901 (2021), 012058. – DOI:10.1088/1742-6596/1901/1/012058.
Balyuba I.G., Konopatskiy E.V., Bumaga A.I. Point calculus // Makeevka: DONNACEA, 2020. 244 p. (In Russian)
Konopatskiy E.V. Geometric theory of multidimensional interpolation // Automation and modeling in design and management. Bryansk: BSTU, 2020. No1(07). 9-16 pp. DOI: 10.30987/2658-6436-2020-1-9-16. (In Russian)
Konopatskiy E.V. Geometric modeling and optimization of multifactor processes and phenomena by multidimensional interpolation // Proceedings of the International scientific conference on physical and technical Informatics CPT2018 (28-31 may 2018). Moscow-Protvino, 2018. 299-306 pp. (In Russian)
Konopatskiy E.V. Principles of construction of computer models of multifactor processes and phenomena by the method of multidimensional interpolation // Proceedings of the II International scientific and practical conference: "Software engineering: methods and technologies of development of information and computing systems (PIIVS-2018)" (14-15 November 2018). Donetsk: DONNTU, 2018. 277-287 pp. (In Russian)
Konopatskiy E.V. Approach to the construction of geometric models of multifactor processes and phenomena by the method of multidimensional interpolation // Software Engineering, 2019. Vol.10. No2. 77-86 pp. DOI 10.17587/prin.10.77-86. (In Russian)
Konopatskiy E.V., Rotkov S.I., Krysko A.A. A general approach to multilinear interpolation and approximation based on linear manifolds // Construction and technogenic safety. Simferopol: V.I. Vernadsky Crimean Federal University, 2019. No. 15(67). 159-168 pp. (In Russian)